MGO
Category:
Keywords:
MGO
Defy heat and sunlight with MgO flooring — the ultimate solution for sunrooms and high-temperature areas. By completely resolving the age-old issue of expansion and contraction, it maintains near-zero dimensional change even under extreme thermal stress. This proprietary, complex technology delivers unmatched stability where conventional flooring fails, backed by a perfect claims record since its introduction to overseas markets.
MgO Flooring Specification
| Dimensions | 1210x194mm，1210x165mm，1210x144mm |
| Thickness | 6mm, 8mm |
| Wear Resistance | AC2,AC3,AC4, AC5 |
| Core | MgO |
| Texture | Normal Embossed, EIR |
| Edge Locking Type | Angle-Angle Click |
| Edge Profile | Unilin Click |
| Edge Type | 4 Side Bevel |
Structural Diagram
Advantages
Superior scratch-resistant, AC4, AC5 or plus.
Bio-degradable and Natural-degradable products, with all naturalmaterials, all virgin materials.
Almost zero dimensional changes along with changes in environmentaltemperature.
Non-PvC product;Formaldehyde Free and Phthalates Free.
MgO core is A grade FIREPROOF
|
|
 |
 |
 |
| Test Items | Methodology | Standard Value | ART Specification | |
| Surface length,MD Surfad ace width,AMD | ISO 24337 ISO 24337 | 1208±0.50mm 144,165,195±0.15mm ±0.15mm <=0.25mm | 1208.02 mm 144.08,165.02,195.03 mm 6.05mm | |
| Thickness | ISO 24337 | |||
| Squareness | ISO 24337 | <=0.05mm | ||
| Straightness | ISO 24337 | <=0.50mm | <=0.04mm | |
| Peak king/bowing | MD AMD | Corne ers curling up | <=1.00mm <=0.20mm | <=0.20mm <=0.05mm |
| Heat curling @ 70℃ Dimensional stability @70℃ | MD AMD MD AMD | ISO 23999 | <=1.00mm <=1.00mm <=0.20% <=0.20% | <=0.30mm |
| <=0.12mm <=0.04% <=0.04% | ||||
| Coefficient of Expansion | ART | <=0.06% | <=0.01% | |
| Installation gap | ISO 24337 | <=0.10mm | <=0.05mm | |
| Height difference | ISO 24337 | <=0.15mm | <=0.05mm | |
| Gloss | ART | Gloss meter 60 gree | 6~8%,55-63% 1.4g/cm3 | |
| Density | ISO 23996 | 1.3~1.5 g/cm3 | ||
| Resistance to chemicals | NALFA LF013.4 | No change <=0.5 g/ml >=A | No change <0.1 g/ml A >=310N/50mm | |
| Formaldehyde Fire Resistanc | Desiccator Meth lethod | |||
| ASTM E84 | ||||
| Click tensile streng gth Residual indentation | ISO 24334 | >125N/50mm | ||
| ASTM F1914 | < 8%, without cushion | <=1% | ||
| MOE Bending strength | EN 310 | >5000 >25 MPa | >8000 >35 MPa >1800mm >=20N | |
| Large ball impact resistance Scratch resistance Boiling Test | NALFA LF01-3.5 | >=1200mm(47.3")(with 340g ball) >15N No delamination after in cooking water 95℃ x 6hrs | ||
| ISO1518 | ||||
| ART | No delamination | |||
| 3 cycles soaking test Water resistance of Ahesive | ANSI/HPVA EF 2012 | No e layer No delamination between MgO core and décor layer or balance layer | No delamination No delamination | |
| ART | ||||
| Water standing | ART | No leakag , visible cupping, swelling or cracking due to the test after 24 hrs | PASS | |
| Resistance to Cold | ART | Temperature -18℃ x 6hrs; Then room temperature for 24hrs. Repeat operation above for 3 cycles. wing/end lift-up, delamination, etc.. No cracking, curling, bowingrend it-up, aere | PASS | |
| Resistance to Heat | ASTM F1514 | Av da. re to 160°℉ (70℃) 15000r | PASS > 100000 r (w/o cushion) > 25000 (w/ cork) >25000 r | |
| Castor chair Stability of crystallization Martindale | NALFA LF01 | |||
| ART ART | Castor chair testing for products soaked in water for 20 days | |||
| Bending strength after soaking in water for 10 days MSR-A1/MSR-B1 S42 | >92% B1 | |||
| EN 16094 | ||||
| Tabor abrasion | NALFA LF01-3.7 | >AC4 (> 4000 r) | ||
| Sunli ht Simulation Test | ART | Almost no changes 60℃ x 3hrs, <= 0.15% No obvious change, <= 0.15% | Almost no changes | |
| Thickness swelling | NALFA LF01 | <=2.0% Refer to MgO core board testing,<10% Refer to MgO core board testing,<10% | <=1.5% | |
| Water Absc Absorption | ASTM D570 | <6% | ||
| Moisture Content | GB T 33544 | <5% | ||
| Water Immersion | ART | Immersion product into ambient temperature water for 96hrs, the board f atness. | PASS | |
| Water Vapor Penetration Testing | ART | Testing installed flooring in 15 days: Gap <= 0.2mm, Cupping of installed planks <= 0.15% on the widt n the width, end peaking <= 0.5mm.No visu al defects under low angle light in the dark: peaking, cupping, telegraphing, cracking, etc.. | PASS | |
| Dimensiona |Stability(Big Chamber) | ART | Tempera e o Umidi 025Neidi idity control,for e a nuninaity Tange. 0 0(N 24hrs; Then @ 60°℃/20% for 24hrs. Inspection: Gap <=0.2mm; Cupping of installed planks <= 0.15% on the width. No visual defects under low angle light in the dark (peaking, cupping, telegraphing, crack cking,...). | PASS | |
| Dimensional Stability (Small Chamber) | ART | Temperature & Humidity range: 0℃ (31F); No humidity control, 60°℃/20%(140F/20%): Cup and Dome <= 0.15% of the width; End lift and Bow <=0.5% of the length; No visual defects: crack, delamination, etc..; Measure lanks is laid on a glass table with the top- face facing upward. Then measure the gap between the plank and the glass plate. Make sure the glass table is perfectly flat first.The measurements are done INSIDE the small chamber. Do not take out the sam ment. | PASS | |
| Surface bonding strength | NALFA LF01-3.10 | >=1.2N/m㎡ | >=1.5N/m㎡ | |
| PVC contents | PGC-MS | None PVC content | N/A | |
| Asbestos | PGC-MS | No asbe | N/A | |
| Plasticize S | CPSC-CH-C1001-09-03 | None plasticizers | N/A | |
| Heavy metals | ASTM F963-17 | 8 items | N/A | |
| VOC | Floorscore/ | No Fibre-Glass embedded No void holes are allowed in the core Not allowed Not allowed | PASS N/A N/A | |
| Fibre Glass Void holes in core Halogenation / Sweating Efflorescence | ART | |||
| ART | ||||
| GB/T 33544-2017 ART | Not allowed Not allowed | |||
Thanks for your interest in ART!
Send us your product requirements, and our professional service team will assist you!
Contact person: Jackie
E-mail: sales@artdetodos.com
Whatsapp: +86 15861196651
Add: No.8 Tenghui Road, Zouqu Town, Zhonglou District, Changzhou City, Jiangsu Province, 213000, China
Leave a Message
*Please ensure you fill in the information accurately—we’ll get in touch with you as soon as possible.
Copyright © 2025 Changzhou ART Decoration Materials Co., Ltd